Does VMP support preset images for no data signal?
It is not supported in the mainline version, but can be supported through customization.
In LCT, if some cabinets display normally while others do not, exporting and importing configuration files can solve the problem. How does VMP solve this issue?
VMP has cabinet painter function that can read parameters from normal cabinets and send them to cabinets which displays abnormally to solve the issue.
For NCP files, users can save them in the VMP local pack or on the device pack, supporting import and export. Once users import the NCP file into these two storage locations, they don’t have to worry about losing it. Updating directly the correct NCP file to cabinets which displays abnormally can also solve the issue.
In VMP, when dragging a large number of cabinets, the screen will be stucking. What is the reason for this?
There is a 400ms delay for sending data; this is not stucking.
What is the difference between the step size for fine adjust and quick adjust in seam correction?
The step size for quick adjust is 32 units, and the step size for fine adjust is 8 units.
When manually adjusting the thermal compensation slider by a large margin, cabinet changes are not synchronized, and some cabinets react with a delay. Can this issue be resolved?
The adaptive thermal compensation feature is recommended to be used in automatic mode. If manual mode is necessary, the correct adjustment process is to check the status while making multiple small step size adjustments, and finally select the best adjustment value. We do not recommend to make large step size adjustments, which can cause display issues. This issue will be optimized in future VMP versions.
Why does the screen flicker when switching output bit depth from 8bit to 10bit or 12bit?
When switching output bit depth, Gamma mapping will be switched. During the Gamma mapping switching process, screen flicker may occur. This issue will be optimized in future VMP versions.
For cabinets equipped with A10s Pro, can multi-batch coefficients be saved to the module flash in VMP?
For A10s Pro with firmware version V1.5.3.0 or above, coefficients cannot be saved to the module flash.
For A10s Pro with firmware version below V1.5.3.0, coefficients can be saved to the module flash.